Friday, September 6, 2019
History 1920s Essay Example for Free
History 1920s Essay America went through many social changes with the American Revolution and industrial revolution. During the 1920ââ¬â¢s, the face of America began to change more into an urban society. Many differences between the rural and urban sides of America emerged. Historians consider the tensions of the 1920s as a backlash against the rising urban America, which turns out true. Rural people believed that the city lacked morals. The urban city dwellers lashed back saying that rural residents did not understand the technology of modern times. In the 1920s, for the first time in American history, more people lived in cities rather than the countryside. People living in the more rural parts of America saw the urban lifestyle as a threat to traditionally shared value. The cities, a haven for political corruption and distraction, had much more alcohol and prostitution problems than their countryside counterparts did. With the rise of Hollywood and films, people found an escape from their routine life and went to see movies that portrayed what it really meant to live the American dream. However, the rural side of the country stuck to the old ways of agriculture life as the struggle between old and new still went on. With the rise in media also came an increase of cultural battles. The media brought about a revolution of morals since many urban Americas saw the changes in media and lifestyle as liberation from the old countryside Victorian past. Granted, the rural Americans did not see it this way. They felt that American had begun to change in sinful ways and that the ethicality of America had begun to decay. Many people in the countryside also resented the amount of immigrants coming into America. As a result, the Klu Klux Klan revived and revolted against the immigrants, Blacks, Catholics, Jews, and any modern or progressive movement. Located mostly in the rural parts of America, the Klu Klux Klan greatly showed their discontent with the modern American lifestyle. The South showed their animosity towards the foreigners and Blacks through discrimination and racism. However, none of this stopped the urban rise of America that the country would soon have to accept.
History 1920s Essay Example for Free
History 1920s Essay America went through many social changes with the American Revolution and industrial revolution. During the 1920ââ¬â¢s, the face of America began to change more into an urban society. Many differences between the rural and urban sides of America emerged. Historians consider the tensions of the 1920s as a backlash against the rising urban America, which turns out true. Rural people believed that the city lacked morals. The urban city dwellers lashed back saying that rural residents did not understand the technology of modern times. In the 1920s, for the first time in American history, more people lived in cities rather than the countryside. People living in the more rural parts of America saw the urban lifestyle as a threat to traditionally shared value. The cities, a haven for political corruption and distraction, had much more alcohol and prostitution problems than their countryside counterparts did. With the rise of Hollywood and films, people found an escape from their routine life and went to see movies that portrayed what it really meant to live the American dream. However, the rural side of the country stuck to the old ways of agriculture life as the struggle between old and new still went on. With the rise in media also came an increase of cultural battles. The media brought about a revolution of morals since many urban Americas saw the changes in media and lifestyle as liberation from the old countryside Victorian past. Granted, the rural Americans did not see it this way. They felt that American had begun to change in sinful ways and that the ethicality of America had begun to decay. Many people in the countryside also resented the amount of immigrants coming into America. As a result, the Klu Klux Klan revived and revolted against the immigrants, Blacks, Catholics, Jews, and any modern or progressive movement. Located mostly in the rural parts of America, the Klu Klux Klan greatly showed their discontent with the modern American lifestyle. The South showed their animosity towards the foreigners and Blacks through discrimination and racism. However, none of this stopped the urban rise of America that the country would soon have to accept.
Thursday, September 5, 2019
Molecular Weight Effect of Different Grades of HPC Polymer
Molecular Weight Effect of Different Grades of HPC Polymer Introduction Bioavailability enhancement Wet media milling + spray drying Issues have impact on dissolution performance Novelty of the work Objective Material and methods wet stirred media milling Spray dryer Characterization techniques Results and discussion Physical stability of the milled precursor suspensions Drug breakage kinetics Formation of the NCMPs via spray drying of the precursor drug suspensions Impact of different polymers on the drug dissolution from NCMPs PVP-K30 HPMC-E3 HPC-SSL, HPC-SL, HPC-L Molecular weight effect of different grades of HPC polymer on drug dissolution performance and stability It is estimated that a large percentage of newly developed drug compounds have limited bioavailibity due to their poor water solubility and very slow dissolution rate [1]. According to the Biopharmaceutics Classification System (BCS), class II drugs are categorized as poorly water soluble and highly permeable in human body [2]. To achieve the therapeutic efficacy of these drugs it is very essential to enhance the bioavailability by increasing the solubility or dissolution rate. A number of approaches have been developed over the time to resolve this issue. The reduction of drug particles size to sub-micron or nanometer has been one of the most popular and effective approaches of all [3-6]. By reducing the particles size order of magnitude, specific surface area of the particles increased radically and enhances the rate of absorption and dissolution [7, 8], according to the Noyes-Whitney equation [9]. Drug nanoparticles production technologies are classified into Bottom-up or Top-down or combination of both. The bottom up techniques include precipitation using supercritical fluid, liquid anti-solvent precipitation, and evaporative precipitation, where small drug particles are produced from drug molecules dissolved in organic solvent [10, 11]. In case of top-down approaches, the particles are reduced to the nanometer range [11]. High pressure homogenization [5] and wet media milling [3] are included in top-down approaches. To prepare drug nanosuspension, wet stirred media milling (WSMM) has achieved the most popularity because of its effectiveness, robustness, scalability, high drug loading, and low polymer side effects [5, 12, 13]. Due to many advantages of drug solid dosage form, it is the most popular dosage form to the patients/clinicians. To encounter this high demand, drug nanosuspensions are usually converted into nanocomposite microparticles (NCMPs) using different drying techniques and incorporated into standard solid dosage forms such as tablets and capsules [13, 14]. Vacuum dryer [15, 16], spray-freeze dryer [17, 18], spray dryer [19, 20], and fluidized bed [17] are very prevalent and widely used drying tools in the pharmaceutical industries. Among all the drying techniques, spray drying has already got attention due to its energy intensive, continuous and scalable drying process characteristics and ability to produce micro to nano-sized particles with a very narrow distribution within a very short time frame [21]. Albeit particle size reduction is an effective technique for bioavailability enhancement, stability issue has always been critical for the efficacy of the drug products. In the nanosuspension, drug particles start losing their specific surface area by aggregation due to relatively high surface energy and specific surface area and also for enhanced Brownian motion [22]. For the prevention of aggregation in the wet media and having better stability, polymers and/or surfactants are added to the suspension as stabilizers. These stabilizers provide stability by electrostatic or electrosteric mechanisms [22]. Steric stability provided by the polymer is drug specific. Only few polymers can help to reduce the particle size of a specific drug down to nanometers. Therefore, selecting a proper stabilizer for a specific drug is a very complex process and cannot be generalized easily [23]. Thus, having a better insight about the polymer properties is very crucial to figure out the right stabilize r for a particular drug. Molecular weight of the polymer is a very significant property of polymers, which determines the capability for steric stabilization along with solution properties [24, 25], regulates mechanical property of the films [26], and controls the drug release during oral administration [27]. Consequently, optimum MW and polymer concentration may help to get the best stabilization performance during and after milling, and faster drug release from the composites.Ãâà Choi et al. [16] investigated the impact of lower range MW (11,200-49,000 g/mol) of hydroxypropyl cellulose (HW) on itraconazole suspension production and their recovery from the drug composites. In that work, HPC was used solely with the same concentration, and dissolution performance study was absent.Ãâà Sepassi et al. [28] studied MW effect of two different polymers hydroxypropylmethyl cellulose (HPMC) and polyvinylpyrrolidone (PVP) on the particle size reduction of milled nabumetone and ha lofantrine suspensions; however, drying and dissolution rate were not studied. Li et al. [29] studied the MW and concentration effect of hydroxypropyl cellulose (HPC) on the dissolution performance of poorly soluble drug griseofulvin (GF) in presence/absence of sodium dodecyl sulfate (SDS) as surfactant. In that investigation, drug nanosuspension was coated and dried on to the surface of pharmatose using fluidized bed technique and also determined the optimum concentration and MW effect of HPC for complete release of the drug particles during dissolution. To authors best knowledge, no comprehensive and systematic study has been performed so far to get the insight about the head to head comparison of different polymers performance and MW effect of the same polymer on the suspension stability after milling and during dissolution of NCMPs produced via spray drying. It is known from prior study that the combined use of polymers and surfactants provide a synergistic effect leading to better stability in the nanosuspension than individual stabilizers [30, 31]. Due to the side effects of surfactant, it is always expected to use minimal amount in the formulation. If only the use of polymer can provide substantial stability in the nanosuspension and immediate release of the drugs in the dissolution from NCMPs, then it is more viable than using surfactant.Ãâà Therefore, this study aims to develop an understanding of the polymer MW and different polymer effect on the physical stability of Itraconazole nanosuspension and drug dissolution fr om the composites. Itraconazole (ITZ) suspensions were milled in a WSMM and the nanocomposite particles were produced using a co-current spray dryer. Three different polymers HPC, PVP, and HPMC were used at 4.5% (w/w) concentration to see the polymer effect and for MW effect, three grades (SSL, SL, and L) of HPC having different MW were used. Laser diffraction, SEM, UV- spectroscopy, XRPD, and DSC were used to analyze the drug suspension and composite particles. Dissolution test of the NCMPs were performed by a USP II paddle apparatus. Materials Itraconazole (ITZ), is an antifungal drug with a water solubility 0.13 mg/L (at pH-7 and 25 Ãâà °C), is a sparingly water soluble drug belong to the BCS Class II was purchased from Jai Radhe Sales (Ahmedabad, India) and was used as-received condition. Three different polymers, hydroxypropyl cellulose (HPC), hydroxypropylmethyl cellulose (HPMC), and polyvinylpyrrolidone (PVP) were used as polymers. Three grades (SSL, SL, and L) of HPC with ~40, ~100, and ~140 kDa molecular weight, respectively, were donated by Nisso America Inc. (New York, NY, USA) and used for steric stabilization. Polymeric stabilizers Methocel E3 grade HPMC and PVP Kollidon 30 were donated by Dow Chemical (Midland, MI, USA) and BASF Corporation (Florham Park, NJ, USA) respectively. Sodium dodecyl sulfate (SDS) is an anionic surfactant used as a wetting agent during dissolution and provide electrostatic stabilization in the suspension, was purchased from Sigma Aldrich (Milwaukee, WI, USA). Zirmil Y grade wear-re sistant yttrium-stabilized zirconia (YSZ) with a median size of 430 Ãâà µm (400 Ãâà µm nominal size) was used as the milling media and purchased from Saint Gobain ZirPro (Mountainside, NJ, USA). Methods Wet Stirred Media Milling (WSMM) The presuspension (before milling) was prepared following the same procedure used in Afolabi et al. [32]. All the suspension formulations are tabulated below in Table 1. API (Itraconazole) concentration was kept constant at 10% (w/w) and polymer concentration was 4.5% (w/w) for all the formulation. All the concentrations are reported with respect to deionized water (200g). The formulation with 2.5% (w/w) HPC-SL and 0.2% (w/w) SDS was used as a baseline formulation, because from earlier study it was found to be the optimum for fastest and complete drug release from the composite powders. Prepared drug suspension was milled in a Netzsch wet media mill (Micorcer, Fine Particle Technology LLC, Exton, PA, USA) with 80 ml chamber; 50 ml of the chamber was filled with 400 Ãâà µm (nominal size) Zirconia beads, which is the milling media and a screen with 200 Ãâà µm opening was used to hold the beads into the chamber and allowing only the passage of the suspension. A shear mixer (Fisher Scientific Laboratory Stirrer, Catalog No. 14-503, Pittsburgh, PA) was used to prepare the suspension prior to transfer into the holding tank of the miller. The suspension was pumped through a peristaltic pump and was milled under the following conditions: suspension flow rate 126 ml/min, rotor speed 4000 rpm corresponding to a tip speed of 11.7 m/s. To keep the suspension temperature below 35 Ãâà °C, milling chamber and holding tank both were equipped with a chiller (Advantage Engineering Greenwood, IN, USA).Ãâà All the parameters were selected from the earlier work done by Afolabi et al. [31]. To determine the breakage kinetics, particle sizes were measured at different time intervals up to 65 minutes and the suspension were refrigerated at 8 Ãâà °C for one day before spray drying. Preparation of NCMPs via Spray Drying The prepared nanosuspesions were dried within a day of milling using a spray dryer (4M8-Trix, Procept, Zelzate, Belgium) running in a co-current flow set up. All the operating conditions were taken from Azad et al. [19].The suspensions were atomized at 2 bar atomizing pressure using a bi-fluid nozzle having 0.6 mm tip diameter. In each run, ~120 gm nanosuspensions were sprayed at 1.3-1.6 g/min spray rate using a peristaltic pump (Makeit-EZ, Creates, Zelzate, Belgium). Drying air was fed co-currently from the top of the column at 120 Ãâà °C temperature and 0.37-0.40 m3/min volumetric flow rate. To avoid sedimentation of the drug particles during spraying, the suspension was stirred using a magnetic stirrer throughout the run. A Cyclone separator was used at 54-70 mbar differential pressure to separate the NCMPs from the outlet air stream and collecting them in a glass jar. The dried powders later on were used for powder sample characterization e.g., XRD, DSC, Rodos, and dissolutio n testing. Particle Size Analysis Particle size distributions of the suspensions were measured at different time interval during milling and after 7-day storage in the refrigerator by laser diffraction (LD) technique using Coulter LS 13 320 (Beckman Coulter, Miami, FL). All the steps involved for measuring PSDs of the suspensions were followed from Li et al. [29]. During sample addition, intensity was maintained between 40-45% while obscuration was below 8%. Mie scattering theory was used to compute the volume-based PSDs in the software. Refractive index value is 1.68 for ITZ and 1.33 for deionized water (medium). Before measuring the PSDs, 2 ml suspension sample was collected from the outlet of the mill chamber and diluted with 5 ml of the respective stabilizer solution using a vortex mixer (Fisher Scientific Digital Vortex Mixer, Catalog no: 0215370, Model No: 945415, Pittsburgh, PA) at 1500 rpm for 1 min. The Particle size distributions (PSDs) of produced NCMPs via spray drying were measured by Rodos/Helos laser diffraction (LD) system (Sympatec, NJ, USA) based on Furnhofer theory with dry powder dispersion module. On the sample chute of the Rodos dispersing system, just about 1 g of the sample was placed. To feed the samples, the sample chute was vibrated at 50% settings and 0.1 bar dispersion pressure was imposed to suck in the falling powder through the sample cell of the laser diffraction system. Determination of Drug Content in the Composite Powders Drug content of the composite powders were measured by assay testing. ITZ solubility is - in dichloromethane (DCM). 100 mg of the NCMPs was dissolved in 20 ml DCM, sonicated for 30 mins to ensure all the ITZ is dissolved in the solvent and then they were allowed to sediment overnight. An aliquot of 100 Ãâà µl is taken from the supernatant and diluted to 10 ml with DCM. The absorbance of all the samples was measured at 260 nm wavelength via Ultraviolet (UV) spectrophotometer (Agilent, Santa Clara, CA, USA). Six replicates were prepared from each NCMP formulation to calculate mean drug content and percent relative standard deviation (RSD). Scanning Electron Microscopy (SEM) SEM imaging was performed to understand the morphology and particle size of the ITZ particles before and after milling. SEM images of as-received ITZ and baseline formulation was taken using a LEO 1530 SVMP (Carl Zeiss, Inc., Peabody, MA, USA) SEM machine. Approximately, 0.1 ml milled suspension sample was placed on top of a silicon chip (Ted Pella Inc., Redding, CA, USA), and then on top of a carbon specimen holder. The sample was placed into a desiccator for overnight drying. The samples were then sputter coated with carbon before analyzing [33]. X-ray Powder Diffraction (PXRD) The crystallinity of the as-received ITZ, physical mixture of ITZ-excipinets, and spray dried powders were analyzed using PXRD (PANalytical, Westborough, MA, USA), provided with Cu KÃŽà ± radiation (ÃŽà »= 1.5406 Ãâ¦). The samples were scanned at a rate 0.165 S-1 for 2ÃŽà ¸ ranging from 5 to 40Ãâà °. Differential Scanning Calorimetry (DSC) DSC of the as-received ITZ, Physical mixture of ITZ-excipients, and spray dried powders was performed using a Mettler-Toledo polymer analyzer (PolyDSC, Columbus, OH, USA). The samples were heated at a rate of 10 Ãâà °C/min within a range of 25-220 Ãâà °C under nitrogen gas flow. With the help of the integrated software of the machine, melting temperature Tm and fusion enthalpy ÃŽâ⬠Hm were determined. Dissolution Testing Dissolution of ITZ from the as-received drug, and spray dried composite powders were determined via a Distek 2100C dissolution tester (North Brunswick, NJ, USA) according to the USP II paddle method.Ãâà The dissolution medium was 1000 ml SDS buffer with 3.0 gm/ml concentration at non-sink condition.Ãâà The medium was maintained at 37 Ãâà °C temperature and 50 rpm paddle speed.Ãâà The composites were weighed equivalent to a dose of 20 mg of ITZ. Composites were poured into the dissolution medium and manually 4 ml of samples were taken out at 1, 2, 5, 10, 20, 30, and 60 min. Aliquots of the samples were filtered using a 0.1 Ãâà µm PVDF membrane type syringe filter to avoid any effect of undissolved drug during UV spectroscopy measurement. The absorbance of ITZ dissolved was measured via UV spectroscopy (Agilent, Santa Clara, CA, USA) at 260 nm wavelength. The blank was measured using SDS buffer at the beginning. The amount of drug dissolved was measured using a calibration curve generated from drug concentration vs. absorbance (R2=0.9995 with p Apparent Shear Viscosity of Milled ITZ Suspensions The apparent shear viscosity of the nanosuspension was measured by following the procedure from Afolabi et al. [32], using R/S plus rheometer (Brookfield Engineering, Middleboro, MS, USA). To impart controlled shear rate on the samples from 0 to 1000 1/s in 60 s, a coxial cylinder (CC40) was used. To control the temperature the jacket temperature was kept constant at 25Ãâà ±0.5 Ãâà °C. Drug nanoparticles formation and physical stability of the milled suspensions The formulation of the milled drug (ITZ) suspensions are presented in Table 1. Drug (ITZ) nano suspension was first produced in presence of both steric and an anionic surfactant, SDS (Run 1). Due to the synergistic effect of HPC and SDS [31], Run 1 was used as a baseline to assess the impact of various stabilizers (HPC, HPMC E3, PVP k30, and SDS) in their breakage kinetics and physical stability of the resulting suspensions. This baseline formulation was found to be the optimum formulation from a previous work performed by Meng et al [29]. The molecular weight effect of HPC was then studied in absence of SDS surfactant (Run 2-4) using three different grades of HPC; SSL, SL, and L grades having molecular weight ~40, ~100, and ~140 kDa, respectively. The apparent shear viscosity of all the formulations (Run 1-7) are represented in Figure 1. Formulations with 2.5% (w/w) HPC-SL/SDS, 4.5% (w/w) HPC-SL, and 4.5% (w/w) HPC-L (Run 1, 3, and 4) are showing near Newtonian behavior, indicating the extent of aggregation is very low. Milled drug suspensions stabilized by SDS or polymer alone (except HPC-SL and HPC-L) are showing significant shear-thinning behavior, indicating significant amount of aggregates. References 1.Kesisoglou, F., S. Panmai, and Y. Wu, Nanosizing-oral formulation development and biopharmaceutical evaluation. Advanced drug delivery reviews, 2007. 59(7): p. 631-644. 2.Amidon, G.L., et al., A theoretical basis for a biopharmaceutic drug classification: the correlation of in vitro drug product dissolution and in vivo bioavailability. Pharmaceutical research, 1995. 12(3): p. 413-420. 3.Merisko-Liversidge, E. and G.G. Liversidge, Nanosizing for oral and parenteral drug delivery: a perspective on formulating poorly-water soluble compounds using wet media milling technology. Advanced drug delivery reviews, 2011. 63(6): p. 427-440. 4.Panagiotou, T. and R.J. Fisher, Form nanoparticles via controlled crystallization. Chemical Engineering Progress, 2008. 104(10): p. 33-39. 5.Keck, C.M. and R.H. Mà ¼ller, Drug nanocrystals of poorly soluble drugs produced by high pressure homogenisation. European Journal of Pharmaceutics and Biopharmaceutics, 2006. 62(1): p. 3-16. 6.Mà ¼ller, R., C. Jacobs, and O. Kayser, Nanosuspensions as particulate drug formulations in therapy: rationale for development and what we can expect for the future. Advanced drug delivery reviews, 2001. 47(1): p. 3-19. 7.Singh, S.K., et al., Investigation of preparation parameters of nanosuspension by top-down media milling to improve the dissolution of poorly water-soluble glyburide. European Journal of Pharmaceutics and Biopharmaceutics, 2011. 78(3): p. 441-446. 8.Tanaka, Y., et al., Nanoparticulation of probucol, a poorly water-soluble drug, using a novel wet-milling process to improve in vitro dissolution and in vivo oral absorption. Drug development and industrial pharmacy, 2012. 38(8): p. 1015-1023. 9.Noyes, A.A. and W.R. Whitney, The rate of solution of solid substances in their own solutions. Journal of the American Chemical Society, 1897. 19(12): p. 930-934. 10.Sun, B. and Y. Yeo, Nanocrystals for the parenteral delivery of poorly water-soluble drugs. Current Opinion in Solid State and Materials Science, 2012. 16(6): p. 295-301. 11.Chan, H.-K. and P.C.L. Kwok, Production methods for nanodrug particles using the bottom-up approach. Advanced drug delivery reviews, 2011. 63(6): p. 406-416. 12.Bhakay, A., et al., Novel aspects of wet milling for the production of microsuspensions and nanosuspensions of poorly water-soluble drugs. Drug development and industrial pharmacy, 2011. 37(8): p. 963-976. 13.Van Eerdenbrugh, B., G. Van den Mooter, and P. Augustijns, Top-down production of drug nanocrystals: nanosuspension stabilization, miniaturization and transformation into solid products. International journal of pharmaceutics, 2008. 364(1): p. 64-75. 14.Basa, S., et al., Production and in vitro characterization of solid dosage form incorporating drug nanoparticles. Drug development and industrial pharmacy, 2008. 34(11): p. 1209-1218. 15.Kim, S. and J. Lee, Effective polymeric dispersants for vacuum, convection and freeze drying of drug nanosuspensions. International journal of pharmaceutics, 2010. 397(1): p. 218-224. 16.Choi, J.-Y., C.H. Park, and J. Lee, Effect of polymer molecular weight on nanocomminution of poorly soluble drug. Drug delivery, 2008. 15(5): p. 347-353. 17.Wang, Y., et al., A comparison between spray drying and spray freeze drying for dry powder inhaler formulation of drug-loaded lipid-polymer hybrid nanoparticles. International journal of pharmaceutics, 2012. 424(1): p. 98-106. 18.Cheow, W.S., et al., Spray-freeze-drying production of thermally sensitive polymeric nanoparticle aggregates for inhaled drug delivery: effect of freeze-drying adjuvants. International journal of pharmaceutics, 2011. 404(1): p. 289-300. 19.Azad, M., et al., Spray drying of drug-swellable dispersant suspensions for preparation of fast-dissolving, high drug-loaded, surfactant-free nanocomposites. Drug development and industrial pharmacy, 2015. 41(10): p. 1617-1631. 20.Lee, J., Drug nanoà ¢Ã¢â ¬Ã and microparticles processed into solid dosage forms: physical properties. Journal of pharmaceutical sciences, 2003. 92(10): p. 2057-2068. 21.Kemp, I.C., Fundamentals of energy analysis of dryers. Modern Drying Technology, 2011. 4: p. 1-46. 22.Kim, C.-j., Advanced pharmaceutics: Physicochemical principles. 2004: CRC Press. 23.Lee, J., et al., Amphiphilic amino acid copolymers as stabilizers for the preparation of nanocrystal dispersion. European journal of pharmaceutical sciences, 2005. 24(5): p. 441-449. 24.Adamson, A. and A. Gast, Physical chemical of surfaces. 1997, New York: Wiley. 25.Ploehn, H.J. and W.B. Russel, Interactions between colloidal particles and soluble polymers. Advances in Chemical Engineering, 1990. 15: p. 137-228. 26.Rowe, R., The effect of the molecular weight of ethyl cellulose on the drug release properties of mixed films of ethyl cellulose and hydroxypropylmethylcellulose. International journal of pharmaceutics, 1986. 29(1): p. 37-41. 27.Mittal, G., et al., Estradiol loaded PLGA nanoparticles for oral administration: effect of polymer molecular weight and copolymer composition on release behavior in vitro and in vivo. Journal of Controlled Release, 2007. 119(1): p. 77-85. 28.Sepassi, S., et al., Effect of polymer molecular weight on the production of drug nanoparticles. Journal of pharmaceutical sciences, 2007. 96(10): p. 2655-2666. 29.Li, M., N. Lopez, and E. Bilgili, A study of the impact of polymer-surfactant in drug nanoparticle coated pharmatose composites on dissolution performance. Advanced Powder Technology, 2016. 30.Ryde, N.P. and S.B. Ruddy, Solid dose nanoparticulate compositions comprising a synergistic combination of a polymeric surface stabilizer and dioctyl sodium sulfosuccinate. 2002, Google Patents. 31.Bilgili, E. and A. Afolabi, A combined microhydrodynamics-polymer adsorption analysis for elucidation of the roles of stabilizers in wet stirred media milling. International journal of pharmaceutics, 2012. 439(1): p. 193-206. 32.Afolabi, A., O. Akinlabi, and E. Bilgili, Impact of process parameters on the breakage kinetics of poorly water-soluble drugs during wet stirred media milling: a microhydrodynamic view. European Journal of Pharmaceutical Sciences, 2014. 51: p. 75-86. 33.Li, M., et al., An intensified vibratory milling process for enhancing the breakage kinetics during the preparation of drug nanosuspensions. AAPS PharmSciTech, 2016. 17(2): p. 389-399.
Wednesday, September 4, 2019
Going Towards a Postpatriarchal Family :: Philosophy Hochschild Women Papers
Going Towards a Postpatriarchal Family Ours is a time of dramatic and confusing transformations in everyday life, many of them originating in the social enfranchisement of women that has occurred over the past twenty-five years. Sociologist Arlie Hochschild demonstrates a widespread phenomenon of work-family imbalance in our society, experienced by people in terms of a time bind, and a devaluation of familial relationships. As large numbers of women have moved into the workplace, familial relations of all sorts have been colonized by what Virginia Held critically refers to as the contractual paradigm. Even the mother/child relationship, representing for Held an alternative feminist paradigm of selfhood and agency, has been in large part "outsourced." I believe that an Arendtian conception of speech and action might enable us to assert anew the grounds for familial relations. If we require a new site upon which to address our human plurality and natality, the postpatriarchal family may provide that new site upon which indi viduals can freely act to recreate the fabric of human relationships. It would seem to be our moral and political responsibility as social philosophers today to speculatively contribute to the difficult yet imperative task of reconfiguring the family. In this paper, I attempt to articulate the basic assumptions from which such a reconfiguration must begin. I. Some Ironies of Our Current Moment While motherhood represented women's primary opportunity for achievement and respect within previous societies, second-wave feminism critically explored the lived reality of women as mothers within our middle-class American society. Betty Friedan's influential The Feminine Mystique, published in 1965, indicted the deadly boredom of the suburban home, while later works such as Adrienne Rich's Of Woman Born, articulated with devastating incisiveness the oppressive qualities of the contemporary institution of motherhood. According to Rich, the intense joys of mothering children were embedded in a patriarchal structure that created agonizing conflicts for any woman who saw herself as more than merely a nurturer of her spouse and children. As feminists, we believed that the institutions of family and motherhood would change quite radically as women entered the workplace. And they have. Our lives have been dramatically transformed over the last twenty-five years, through a process I refer to as "the social enfranchisement of women." (1) As large numbers of women have entered the public workforce and contraception has become widely available, women have come to be seen as possessing the same economic and political rights and responsibilities as men.
Tuesday, September 3, 2019
INDOPCO :: essays research papers
The INDOPCO case in 1992 provided some guidelines concerning capitalization for the taxpayer. In the case, the Supreme Court ruled that expenses directly incurred in reorganizing or restructuring a corporate entity for the benefit of future operations are not deductible. The court also held that investment banker fees, legal fees, proxy costs, and SEC fees incurred by a target corporation in a friendly takeover must be capitalized if the takeover produces significant future benefits. The taxpayer would rather expense the costs as this would give them a deduction on their taxes. Capitalizing these costs also increases their income, increasing the amount of taxes they have to pay. Thus, the IRS encourages capitalizing costs whenever there is a question as to what method to use. Originally the taxpayer had more of an advantage because the ruling was left open to much interpretation and the IRS was rather lenient concerning the future benefits. The Supreme Court just said that determining future benefits is undeniably important in determining whether a future expense should be capitalized. There have now been rulings where the IRS has become more aggressive in dealing with future benefits. The IRS realizes that companies will expense anything they can to reduce their tax burden. Even costs that would be incurred while investigating the expansion of a companyââ¬â¢s existing business should be expensed if they are connected to an event that produced a significant long-term benefit. The only way they can be expensed is if the acquisition proves to be an unsuccessful one. The INDOPCO ruling also leaves open the question as to what directly incurred means. Companies were left to decide whether to capitalize a cost that was incurred to secure a benefit that extended beyond the current year, even though the transaction was not one in which a specific, identifiable asset was acquired. If it was determined the cost provided a significant long term benefit, the cost was a capital cost, and if not the cost was a period expense. Now, with the additional rulings, the IRS is the ones ââ¬Å"dancing in the streetâ⬠, because companies are forced to capitalize more costs, bringing in more revenues for the government. I think the decision was a good one in the sense that there needed to be some clarification as to what costs should be capitalized and which ones need to be expensed.
Monday, September 2, 2019
Guenevers Love Triangle Essay -- Literary Analysis, The Once and Futu
Nowadays you hear about people cheating on each other and think of it as nothing. In the time period T.H. Whiteââ¬â¢s, The Once and Future King was set, it was a crime as sinful as killing a person. Guenever is a heartless and conniving woman, who gets away with ââ¬Ëmurderââ¬â¢, just because she is the Queen of England. Throughout the book, Guenever is characterized as weak and evil, because her decisions and behavior affect Arthur, Lancelot, and herself negatively. To begin, Guenever manipulates Lancelotââ¬â¢s feelings. She is the majority of his problems and dilemmas. Lancelot tries not to betray Arthurââ¬â¢s trust and save his virtue, but his love for Guenever is making his decisions that much harder. She would tell him to ââ¬Å"ââ¬â¢Come back soonââ¬â¢Ã¢â¬ (340) and leave as she pleased. It affects Lancelotââ¬â¢s ability to maintain his integrity, because Guenever is confusing him, by giving him mixed signals. She makes him think about going against Christianity and the idea of chivalry, two things that he lives by. ââ¬Å"You have won him, and you have broken him. What will you do with him next?â⬠said Elaine (396). Lancelot is confused and he canââ¬â¢t focus on anything other than Guenever, no matter where he is. She is breaking him down emotionally, to the extent where he starts hating himself for loving her. Then, when Guenever finds out about Lancelot and Elaine sleeping together in her castle, she goes ballis tic. ââ¬Å"ââ¬â¢Get out of my castle,ââ¬â¢ screamed the queen at the top of her voice. ââ¬ËNever show your face in it again, your evil, ugly, beastlike face,ââ¬â¢Ã¢â¬ (395). Having his beloved say this to him causes him to lose it, leading him to jump out of the window. No one knew what happened to him. A couple of years later when Lancelot was living with Elaine, the mother of his child... ...y close friends. In all, twenty knights were killed, including Gaheris and Gareth, who were unarmed. Their deaths and the Gueneverââ¬â¢s illegitimate relationship are grounds to begin a war on. This war eventually leads to King Arthurââ¬â¢s death. Guenever made Arthurââ¬â¢s life more difficult, rather than supporting him like a good wife should have. Guenever not only affects Arthur and Lancelot negatively throughout their lives, but also numerous people around her. She is Arthurââ¬â¢s and Lancelotââ¬â¢s largest weakness. Guenever gets herself and the people around her into trouble, and makes their lives miserable in some way or another. Ultimately Gueneverââ¬â¢s bad judgment and decisions made she was the source of a lot of problems and controversies. Cheating on someone you love was much more scandalous in that period of time than it is now, but it is still not the right thing to do.
Sunday, September 1, 2019
Selfishness and Comment Shows Rufus
In the book Kindred, there are many characters that are interesting. One reason this is true, is because the book forwards through time very fast and we see many characters go from infantile to grown adult. One character that changed throughout the story was Rufus Weylin. His development was incredibly interesting because the story somewhat revolves around what he does or what is happening to him. We see him as a very young child to a twenty five year old adult. In this story, Rufus is the most interesting because he develops from a young impressionable child, to a selfish man influenced highly by the antebellum South and other things.First off, when we get the first glimpse into Rufus the boy he is burning his drapery to get attention from his father. He then mentions how he had also burned a barn. Here, we can already tell that Rufus likes to be heard, get his way, and when he doesnââ¬â¢t his reaction is way too exaggerated. He also is already influenced by what he sees around h im. He says to Dana, ââ¬Å"You have to say itâ⬠¦ young masterâ⬠¦youââ¬â¢re suppose to. â⬠Dana responds, ââ¬Å"No. â⬠Rufus grips her arm and says, ââ¬Å"Yes! â⬠This reaction Rufus displays to Dana shows his influence of slave owning times and his inability to accept rejection.Although, when Dana says, ââ¬Å"Rufe, donââ¬â¢t burn anything else. â⬠He responds with, ââ¬Å"I wont. â⬠This indicates that he can take direction from another person and someone who is black, and this leads you to think that maybe he can learn to take direction and possibly change his ways. When Dana returns to the Weylin plantation with Kevin Rufus says, ââ¬Å"Does Dana belong to you now?â⬠¦ wife!â⬠¦ niggers canââ¬â¢t marry white people! â⬠This reaction shows that Rufus was indeed fitting into his societyââ¬â¢s way of thinking and the mere idea of their marriage was insanity.However, as Dana returns again Rufus was indeed changing. This time he was trying to be with Alice, a black girl he had grown up with. As a child Rufus had this girl as his friend, but Rufus was now turning into his father, trying to take a black woman to bed with him. He had gone from a boy hating his father to a young man becoming him. Alice said, He tried to get Judge Holman to sell Isaac south to keep me from marrying him. â⬠This also shows that Rufus is growing into a selfish young man with rash reactions. Similar to when he was a child.Though a lot of his reactions now hurt the ones he loves. He said to Dana about Alice running away, ââ¬Å"Jail. A good whipping. Then theyââ¬â¢ll sell her. â⬠ââ¬Å"Sheââ¬â¢ll be a slave? â⬠ââ¬Å"Her own fault. â⬠This is a good example of his rash harshness. Even though at many points in the story Rufus seems awful, he still has some humanity in him. When asked if he would ever sell anyone like his father he responds, ââ¬Å"I donââ¬â¢t know. I donââ¬â¢t think so. â⬠Th is one comment shows Rufus may be some things but heartless isnââ¬â¢t one of them. In fact, Rufus seems to constantly yearning for someoneââ¬â¢s love.When Alice was being healed Rufus says this time has been great because Alice hasnââ¬â¢t hated him. Although Rufus does hit Alice later when she doesnââ¬â¢t show him love. This shows that Rufus will not be rejected by anyone. His love for Dana even drives him to hold a gun to her and yell, ââ¬Å"Youââ¬â¢re not leaving!â⬠¦ Damn you, youââ¬â¢re not leaving me! â⬠Rufusââ¬â¢ need for his way and only his way continues when his father passes away. He says, ââ¬Å"you let him die?â⬠¦ You let him dieâ⬠¦damn you to hell, you let him die!â⬠¦ you just let him die. â⬠His repetition shows his irrational behavior.He doesnââ¬â¢t take into account that Dana has just saved his life and there was nothing to do for Tom Weylin. Rufus continues to show his selfish behavior mixed with his plantation upbr inging when he sends Dana to the fields to work as punishment. His ultimate step into becoming a plantation owner was with his father passing, and now he was far from the person that said he would never sell a slave. His authority is really noticeable when he says, ââ¬Å"You walk away from me, Dana, youââ¬â¢ll be back in the fields in an hour!â⬠¦ Donââ¬â¢t you ever walk away from me again! At this point his threats arenââ¬â¢t him whining like when he was a child, he meant it. Rufusââ¬â¢ character develops a lot near the end of the book as we realize his feelings toward Dana all to clearly. In the middle of the night he approaches Alice and Dana and says, ââ¬Å"You really are only one woman. Did you know that? â⬠Rufus had Alice for his physical needs and Dana for his emotional. We start to see that Dana wasnââ¬â¢t just his friend; he needed to have her, no matter what. His jealously became clear when he sold the slave Sam for just speaking to Dana.He said, ââ¬Å"He wanted youâ⬠¦he wanted you. â⬠He then says to Dana, ââ¬Å"Your so much like her, I can hardly stand it. â⬠Rufusââ¬â¢ relationship with Dana had gone from friendship and understanding to Rufus wanting more and he aimed to have it. When we see that Rufus was allowing his son to call him daddy finally it was reminder of his humanity. We see that in some ways he was still good, and not racked with intense emotions. However, his humane side diminishes slowly with his irrational wants, desires and need for affection.Rufusââ¬â¢ character is interesting because of his development throughout this novel. In some ways it was radical and in others it was not. As a child he seemed to react too strongly in situations, like he does throughout his life. As a child you think he may change and not let his times control the way he thinks, but as he becomes an adult itââ¬â¢s obvious the South and his father have a big effect on him. In the end, Rufusââ¬â¢ selfishn ess, dominance, possession, and jealousy outweigh his sincerity, ultimately leading to his demise.
Subscribe to:
Posts (Atom)